minnkotamotors.com
INSTALLATION
9
minnkotamotors.com
Step 2: Installing the Talon Mounting Bracket
If you have followed Step 1 carefully and you are installing the mounting
bracket directly to the transom, you are now ready to drill holes. Please
make one final check to ensure that you have met the requirements for
each review and that your drill locations will not encounter any
obstructions (lines, hoses, gas tank, etc…).
1.
Position the mounting bracket in your selected location and mark the
mounting holes. (Figure 8)
2.
If using provided mounting
hardware, use your
5
⁄
16
" drill bit
and carefully drill the marked holes ensur-
ing the drill is perpendicular
to the transom. (Figure 8)
3.
Apply a
1
⁄
8
" bead of 3M 5200
Marine Adhesive Sealant around
each of the (4) drilled holes; as
well as the perimeter of the
Mounting Bracket (staying
approximately ½" from the
outside edge.)
FIGURE 8
