MINN KOTA PowerDrive 45 series Скачать руководство пользователя | Manualshive

Страница: 33 / 45

background image

FCC COMPLIANCE

FCC COMPLIANCE

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference that may be received, including interference that may cause undesired operation.
Changes or modifi cations not expressly approved by Johnson Outdoors Marine Electronics, Inc. could void the user’s authority to
operate this equipment.

INDUSTRY CANADA COMPLIANCE

This product meets the applicable Industry Canada technical specifi cations. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Changes or modifi cations not expressly approved by Johnson Outdoors Marine Electronics, Inc. could void the user’s authority to
operate this equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

CE MASTER USER MANUAL (FOR CE CERTIFIED MODELS)

Ambient operating temperature range: -10C to 50C
Ambient operating humidity range: 5% to 95%
Maximum operating altitude: 10,000 feet

ENVIRONMENTAL RATINGS

«
...
31
32
33
34
35
...
»

Содержание PowerDrive 45 series














































Отзывы:

Нет отзывов

Похожие инструкции для PowerDrive 45 series

Бренд: IEI Technology Страницы: 234

NF796M-H310 Series

Бренд: JETWAY Страницы: 63

Бренд: Quick Страницы: 28

Бренд: ECS Страницы: 74

Бренд: Aaeon Страницы: 113

Бренд: Biostar Страницы: 210

TLV320AIC12KEVM-K

Бренд: Texas Instruments Страницы: 40

Бренд: EPOX Страницы: 83

Бренд: DFI Страницы: 185

SY-P4-645DX DRAGON Ultra

Бренд: SOYO Страницы: 173

Бренд: DFI-ITOX Страницы: 129

Бренд: IEI Technology Страницы: 158

Бренд: Yamaha Страницы: 98

Бренд: Yamaha Страницы: 94

Бренд: Yamaha Страницы: 96

Бренд: Yamaha Страницы: 102

Бренд: Yamaha Страницы: 110

Бренд: Yamaha Страницы: 104

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды