Page
12
of
34
3.5
– CONFIGURATION SCREEN
Direct Connect Mode
This is the default mode and allows for
direct wireless connection to the
controller from a mobile wireless device.
This connection does not require any
network except the wireless access point
that has been created by the WEC
controller. You also set the number of
lights connected here as well
Network Mode
This mode allows for the
connection of the WEC
through a wireless router.
It also allows for the
number of lights
connected to be set.
Advanced Mode
This mode allows for static
IP addressing and various
network configuration
settings including the
uploading of new controller
firmware
Reset Instructions
If you have issue connecting
back up to the controller
than follow the instruction
on the screen to reset the
controller
Configuration
This screen allows the user to select
the different network configurations
where the user can set up IP
addresses, passwords, number of
lights connected and also update the
controller’s firmware
Содержание WEC
Страница 1: ...Page 1 of 34...
