B. THE WALL HAS AN SIDE MOUNT WALL OUTLET BOX
B. THE WALL HAS AN SIDE MOUNT WALL OUTLET BOX
WARNING:
WARNING: If your wall are with an side mount wall outlet box only, follow the steps below to hang your fan properly:
1. Remove the back cover from fan by remove 6 back cover mounting screws. (Fig. 7)
2. Take off the 3-P wire connector and remove the setscrew on power cord, and then CUT OFF
CUT OFF the power cord and take out the power cord from fan
assembly. (Fig. 8)
3. Make the 3-pin wire connections from power wire to the fan assembly. Attach the rubber cover into the hole on fan body. (Fig. 8)
4. Fit the power wire through the hole on center of the back cover. Install the back cover onto the fan assembly with the six back cover mounting
screws previously removed. Be sure to tighten all screws. (Fig. 9)
