
components not supplied by Aire withthe fan will void the Minka Warranty.
OUTLET BOX
HANGER
BRACKET
Step 2. Remove the hitch pin and lock pin from downrod assembly. And remove hanger ball from downrod assembly by
loosening set screw, removing the cross pin and sliding ball off rod. (Fig.7
)
(Fig.6)
(Fig.11)
FIG.9
FIG.10
FIG.11
CANOPY
CANOPY
COVER
COUPLING
COVER
DOWNROD
COUPLING
COVER
FIG.6
FIG.7
FIG.8
Step 3. Loosen the set screws from coupler. Carefully feed fan wires up through the downrod . Thread downrod into the
coupling until the holes are lined up and secure with the lock pin and hitch pin previously removed, tighten set screws.
Slip the coupler cover, canopy cover and canopy onto the downrod. Then, carefully reinstall the hanger ball onto the
downrod, being sure that the cross pin is in the correct position , the set screw is tightened and wires are not twisted.
(Fig.8&Fig.9&Fig.10)
Содержание 04728
