Minka-Aire contactor F547, Инструкция по эксплуатации

Страница: 6 / 15

OUTLET BOX
CEILING
JOIST
CEILING
JOIST
CROSS BRACE
3. B
EGIN
I
NSTALLATION
Tools Required: You will need a phillips screw driver, slotted screw
driver, adjustable wrench, stepladder, wire cutters, and electrical tape.
CEILING JOIST OR
CROSS BRACE
PARALLEL WOOD BRACE
(Min. 2" Thick)
OUTLET
BOX
HANGER BAR
(OPTIONAL)
CEILING
JOIST
M
OUNTING
O
PTIONS
Figures 1, 2 and 3 are examples of
different ways to mount the outlet
box. Note: You may need a longer
downrod to maintain proper blade
clearance when installing on a
steep, sloped ceiling. Longer
downrods are available from your
Minka-Aire™ dealer.
To hang your fan where there is
an existing fixture but no ceiling
joist, you may need to install a
hanger bar as shown in Figure 4
(available at your Minka-Aire™
dealer). If there isn't an existing mounting
box, then read the following
instructions. Disconnect the power
by removing fuses or turning off
circuit breakers.
Secure the outlet box directly to the
building structure. The outlet box
and its support must be able to fully
support the moving weight of the
fan (at least 50 lbs.). Use a U.L.
Listed metal outlet box. Do not use
a plastic outlet box.
FIG. 1
FIG. 3
FIG. 2
FIG. 4
RECESSED
OUTLET
BOX
Angled Ceiling
Maximum 29
°
angle
PROVIDE
STRONG
SUPPORT
HANGER
BRACKET
OUTLET BOX
HANGER
OPENING
MUST BE
FACING
UPSIDE