Minka-Aire contactor F547, Инструкция по эксплуатации

Страница: 10 / 15

SCREWS
S tep 1. Attach the fan blade to
the blade bracket using the screws
p r o v i d e d . Ti g h t e n s c r e w s
securely. Repeat for remaining
blades. (Fig. 15)
Step 2. Remove the rubber stops
from the motor. Rotate the
motor so that the screw holes are
revealed through the opening on
switch cup plate. Align holes in
blade bracket and motor and
secure with proper screws.
Repeat process with the other
blade brackets. (Fig. 16)
Note: You have the option of
installing either five or four blades.
If you are using four blades, mount
blade bracket to the inner screw
holes of motor. If you are using
five blades, mount blade bracket
to the outer screw holes of
motor. (Fig.16)
FIG. 15
7. A
TTACHING THE
F
AN
B
LADES
6. F
INISHING THE
M
OUNTING
Step 1. Slide the canopy up to
ceiling as shown in Figure 14.
Make sure you place the wires
safely into outlet box. Secure the
canopy to the hanger bracket with
the two screws provided on the
bracket.
FIG. 14
FIG. 16
BLADE
BRACKET
FAN BLADE
FIBER
WASHER
INNER
SCREW
HOLES
OUTER
SCREW
HOLES