Minipack-Torre MF21BA54, Инструкция по эксплуатации и техническому обслуживанию

Страница: 41 / 92

Chapter 5. Machine adjustment and setting up EN
Enter the “Password” in the same way.
Once you have entered the
“Name” e and the “Password”
press these two buttons in the
sequence indicated in order to
access the display screens. Note: the padlock symbol next
to the symbol disappears.
Password Reset
To restore programme security with a password follow the procedure described below.
From the initial screen press
the “Setup” button. Press the “Logout” button and
then the button “Main”. The "padlock" symbol has re-
appeared indicating that the
programme is protected with a
password.
5.2.3. Creation of a new AUTOMATIC PROGRAM
The machine normally works in automatic cycle.
The machine is provided with an already memorised automatic program (P1), but with standard parameters.
We recommend creating a new program with the specific settings for your product, before packing it.
To create a new program, proceed as follows.
Press the “Program
configuration” button. Press the “New” button. To rename the just copied new
program, click on the name (e.g.
r3) and type in the new name.
Press Enter then the “Save”
button.
40