MiniMax FORMULA T1, Руководство пользователя, Страница: 56 / 57

T1
20.5
20
20-6 20-6
20-6 20-6
20-6 TROUBLES - CAUSES - WHA TROUBLES - CAUSES - WHA
TROUBLES - CAUSES - WHA TROUBLES - CAUSES - WHA
TROUBLES - CAUSES - WHAT TO DO T TO DO
T TO DO T TO DO
T TO DO
The machine has been tested at factory therefore it must perfectly operate.
A wrong use of the machine might cause some troubles.
TROUBLE TROUBLE TROUBLE TROUBLE TROUBLE
The machine does not start
CAUSE CAUSE CAUSE CAUSE CAUSE WHAT TO DO WHAT TO DO WHAT TO DO WHAT TO DO WHAT TO DO
No power on one phase or more phases Make sure that the 3 phases are hot
Fuses of auxiliary circuit interrupted or Close the housing of fuses; if the machine
housing of fuses open. does not start:
- open the housing
- check the fuses, if necessary replace them (a set
of fuses is supplied in the accessories bag).
Door open Close the door so that it is in contact with the safety
microswitch.
The microswitch serves for stopping the spindle
when unintentionally you open the door or during
the belt change.
Emergency button on Turn the emergency buttons.
TROUBLE TROUBLE TROUBLE TROUBLE TROUBLE
The machine stops during the working
CAUSE CAUSE CAUSE CAUSE CAUSE WHAT TO DO WHAT TO DO WHAT TO DO WHAT TO DO WHAT TO DO
No power on one phase or more phases Make sure that the 3 phases are hot
CAUSE
Fuses of auxiliary circuit interrupted or
Close the housing of fuses; if the machine
housing of fuses open does not start:
- open the housing
- check the fuses: if necessary replace them (a set
of fuses is supplied in the accessories bag).
Too heavy working to the motor power. Wait until the motor overload cutout on the control
board or inside the electric cubicle is cold.