miniland beMyBuddy elphy 89160, Руководство пользователя

Страница: 15 / 44

15
ENGLISH
IMPORTANT: You should take into consideration that the
extractable module may only be connected to one mobile
device at a time, and, as such, if your extractable module is
already connected to another device it will not appear on your
search . In order to be able to connect successfully to the new
device, first turn off and turn on again your extractable module
and carry out one of these three actions.
a) Manually unpair the extractable module of the previous
device to which it was connected from the Bluetooth Settings’
menu of your mobile or Tablet.
b) Disable Bluetooth from the device to which the extractable
module was connected before.
c) Make sure that the device that was connected to the
extractable module previously is outside the coverage range
of the extractable module.
iOS Devices
4. If your mobile device has already enabled Bluetooth, enter
your device’s Settings’ menu.
If your mobile device does not have Bluetooth enabled, when
you press the button to close the last of the explanatory
images, a window will appear which will allow you to go to the
Settings’ menu directly from your device.
Once you are here, enable the Bluetooth on your mobile or
Tablet.
5. Select “beMyBuddy” from the list of Bluetooth devices found.
IMPORTANT: You should take into consideration that the
extractable module may only be connected to one mobile
device at a time, and, as such, if your extractable module is
already connected to another device it will not appear on your
search. In order to be able to connect successfully to the new
device, first turn off and turn on again your extractable module
and carry out one of these three actions.
a) Manually unpair the extractable module of the previous
device to which it was connected from the Bluetooth Settings’
menu of your mobile or Tablet.
b) Disable Bluetooth from the device to which the extractable
module was connected before.
c) Make sure that the device that was connected to the
extractable module previously is outside the coverage range
of the extractable module.
Android Devices
4. When you press the close button in the last window of
explanatory images, you will automatically enter the Settings’
menu of your device. Then check that your Bluetooth is
enabled. If it isn’t, enable it.
5. Search for Bluetooth devices nearby and select
“beMyBuddy” from the list of devices available.
IMPORTANT: You should take into consideration that the
extractable module may only be connected to one mobile
device at a time, and, as such, if your extractable module is
already connected to another device it will not appear on your
search . In order to be able to connect successfully to the new
device, first turn off and turn on again your extractable module
and carry out one of these three actions.
a) Manually unpair the extractable module of the previous
device to which it was connected from the Bluetooth Settings’
menu of your mobile or Tablet.
b) Disable Bluetooth from the device to which the extractable
module was connected before.
c) Make sure that the device that was connected to the
extractable module previously is outside the coverage range
of the extractable module.
6. If the connection is correct, you will hear a beep on your
extractable module and the LED (2) light will start flashing
blue more slowly. Now you can listen to the songs and sounds
included in the beMyBuddy section of the eMyBaby application
from your extractable module. Whilst the music or sounds are
playing, your LED (2) light will come on, fixed and blue.
7. If the next time you are using beMyBuddy you will be doing
so on the same mobile device, the connection will be made
automatically if you enable the Bluetooth on your device first
in the manner indicated previously and then your extractable
module.
If the next time you wish to use beMyBuddy on another mobile
device, follow the recommendations set out in point 5 of this
same section.
Note 1: The extractable module may only be connected to one
single device at any time.
Note 2: Keep your mobile device near the extractable module
during pairing.
Warning 1: If you wish to use beMyBuddy with another
mobile device, firstly turn off and then turn back on again
your extractable module and carry out at least one of these
three actions:
a) Manually unpair the extractable module of the previous
device to which it was connected from the Bluetooth
Settings’ menu of your mobile or Tablet.
b) Disable Bluetooth from the device to which the
extractable module was connected before.
c) Make sure that the device that was connected to the
extractable module previously is outside the coverage
range of the extractable module.
Warning 2: The range of your extractable module is around
10 metres so never move your mobile or Tablet more than
this distance.
In the event that you lose range, bring your mobile device or
Tablet near to the extractable module again. The music or
sounds will continue automatically once you bring both devices
close again.
6. MAINTENANCE
6.1. CLEANING THE EXTRACTABLE MODULE
Follow the instructions set forth below to clean your extractable
module:
- Use a slightly damp cloth to clean the surfaces, taking care
not to let water infiltrate any of the openings.
- Do not use cleaning products or solvents.
6.2. CLEANING THE PLUSH TOY
Follow the instructions set forth below to clean the plush toy:
- Do not use bleach.
- Clean it by hand, do not use a washing machine or dry
cleaning in order to preserve the toy.
- Drain any excess water (do not wring it) and leave it to dry in
the air. Do not use a drier.
- Do not iron it.
Problem Possible cause Solution
Your mobile device is
unable to detect the
extractable module within
its range of coverage on
conducting a search for
Bluetooth devices
Your extractable module is not
turned on.
Turn it on as illustrated in item 5.1
Your mobile Bluetooth is not
turned on.
Turn on your mobile Bluetooth as illustrated in item 5.3.2
7. IDENTIFYING AND SOLVING PROBLEMS