8
Adding Water
1 User is recommended to operate with distilled water for the first time.
(Please follow the instructions given in Cleaning section)
2 Hold the water tank upside-down.
3 Unscrew the water tank cover anti-clockwise.
4 Add cool water into water tank.
5 Screw the water tank cover carefully and check it is properly locked without leakage.
6 Hold the water tank vertically and then place back the base.
7 Put the mist outlet/nozzle on the hole of the water tank surface.
Attention:
1. Use the under-side care handle when carrying the fully filled water tank and place the other
hand under for assistance.
2. Don't put water into the base directly otherwise it will be damaged or cause danger.
3. Don't move the appliance when the water tank is fully filled with water.
Operation method
All the features of this humidifier can be controlled from the “control button on the control panel”
or on the “wireless remote control”.
To Turn On/ Off the humidifiers
Gently press “On/ Off” button on the “control button on the control panel” or the “wireless remote
control” to turn on the humidifier. The moisture will be sprayed from the nozzle. The moisture-spraying
signal will be shown on screen. Press the “On/ Off” button a second time to turn off the humidifier.
How to set the Relative Humidity %
Gently press “Hum / Spray +” button on the control panel or wireless remote control first, it will enter
the Relative Humidity setting control. Pressing “Hum / Spray +” button, user can set the desired relative
humidity % (RH) (to) and increase RH%. While pressing “Hum/ Spray” – button on the control panel or
wireless remote control, user can decrease RH% to set the desired RH. All setting RH% signal is
displayed on the screen. Continuously press the button over one second, you can continuously
increase or decrease RH%. If you don't press the button over 4 seconds, the actual RH% will be
shown on the screen panel again. When the actual RH% is greater than the desired setting RH%
over 3%, the humidifiers will be automatically stopped.
How to set the Spray Level
Gently press “Hum/ Spray -” button on the control panel or wireless remote control first, it will enter
the Spray level setting control. Pressing “Hum/ Spray +”, user can increase the spray level.
The spray level is from 1 to 9 maximum. While pressing “Hum/Spray -” button, on the control panel
or wireless remote control, you can decrease the spray level. All spray level signal is displayed on
the screen. Continuously press the button over one second, you can continuously increase or
decrease spray level. If you don't press the button over 4 seconds, the actual RH% will be shown
on the screen panel again.
