miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
22
By default, the sample rate clock of the USBStreamer is internally derived, but it can also be derived from the
TOSLINK input by using the
Clock Source
selector:
If you are using software that is able to route audio to ten different channels, no further configuration is needed. If,
however, you would like the TOSLINK output to be the default stereo output for all applications, then:
1.
Click on
USBSTREAMER
and then the
Output
button.
2.
Click on the
Configure Speakers
button. Select the
Stereo
button. For the left channel, select Channel 9, and
for the right channel, select Channel 10. Then click
Apply
and then click
Done
.
3.
Select the output sample rate. Typically, 44.1 kHz is the best choice. Some audio players will automatically
change this setting according to the media being played.
4.
To set the USBSTREAMER to be the default audio output device, right-click and select “Use this device for
sound output”.
