miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
13
4.
Click on the
Browse
button and navigate to the plugin download folder and then the
Firmware
folder. Select
the most suitable firmware file according to your application. Below are the folder names. Each folder has two
different files, identical except for ID number, so that two USBStreamers can be connected to the one
computer:
ADAT_I2S
These files will receive and transmit eight channels of audio in ADAT format via the input and output
optical connectors. The sample rate can be 44.1 or 48 kHz.
I2S_TOSLINK
These files will receive and transmit eight channels of audio over the I2S headers, and two channels
over the optical connectors. The sample rate can be 44.1, 48, 88.2, 96, 176.4, or 192 kHz. (All
channels must run at the same sample rate.)
LowSampleRate
These files are will receive and transmit eight channels of audio over the I2S headers. (The optical
connectors are not active.) They will support low sample rates, down to 8 kHz.
TDM
These files are will receive and transmit eight channels of audio over the TDM headers. (The optical
connectors are not active.) They will support of 48/44.1kHz
5.
Click on the
Start
button.
6.
You will get a progress bar as upgrade proceeds. When it completes, you will see a message that the upgrade
completed successfully:
7.
Click on
Exit
.
8.
That’s it! You’re done. You can now use your USBStreamer.
