miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
29
4.3
I
NFRARED REMOTE CONTROL
Many standard and programmable remote control units can be used with the nanoAVR. Instead of adding
another remote to your collection, the nanoAVR can “learn” the control codes of your current remote if it
supports one of the following remote control codes:
NEC
Sony
Philips RC6
Apple Remote
To initiate the learning process, drop down the IR Remote menu and select
IR learning
. Click on the Learn button
for an operation, and then press the desired button on the remote control. If the code is accepted, the status
will change to show a tick.
This screenshot shows the IR learning screen:
The commands
Config Inc
and
Config Dec
can be used to change the selected configuration preset up or down.
This can be used instead of
Config 1
,
Config 2
and so on. Once programmed, check that the programmed
buttons perform the expected function. Note that changing the selected configuration preset with the remote
will cause the user interface to disconnect.
