miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
30
6.4
U
SING THE MINI
DSP
REMOTE
The miniDSP remote control (v2) controls the following runtime functions. The infrared receiver for the remote
is located in the OLED wired remote.
Standby
Has no effect with the Harmony DSP 8x12.
Mute
Mute and unmute audio output.
Volume
Reduce or increase the volume. Each press changes the volume in 0.5 dB
steps. Holding down a button will accelerate the rate of volume change.
Media control
Has no effect with the Harmony DSP 8x12.
Dirac Live
Enable or disable Dirac Live filtering. Dirac Live filtering will be effective
only on presets for which Dirac Live filters have been loaded.
Source selection
Has no effect with the Harmony DSP 8x12.
Preset (1 through 4)
Switch to the selected preset. It takes a few seconds for the preset
selection to complete, while the processor loads the new filters from its
flash memory into the DSP.
