background image

USER GUIDE

 

50

 

 

Figure 32 SNMP settings 

You can change the following parameters: 

Enable SNMP Agent

 - When checked, IP Extender will answer to SNMP requests. 

If a community is blank, you cannot perform the request. E.g. if you want to disable 
the possibility to reset IP Extender via SNMP, don't set a write community.  

Read Community

 - This is the SNMP community, which allows you to retrieve 

information via SNMP.  

Write Community - 

This community allows you to set options and reset IP 

Extender or the host via SNMP.  

System Location - 

Type a description of the physical location of the host. This will 

be used in reply to the SNMP request "sysLocation.0".  

System Contact

 - Type a contact person for the host. This will be used in reply to 

the SNMP request "sysContact.0". 

Enable SNMP Authentication Traps

 -When checked, an SNMP trap will be sent 

in case somebody has tried to access IP Extender via SNMP using a wrong SNMP 
community.  

Enable IP Extender Authentication Traps

 - When checked, an SNMP trap will be 

sent if somebody tries to login via the Web front-end. Both successful and failed 
logins trials will be indicated. Furthermore, there will be notification about other 
security violations like trying to perform an action via Web front-end for which a 
user has no permission.  

Enable Host Traps -

When checked, IP Extender will send SNMP traps whenever 

the host is reset, powered down or powered up.  

Содержание Smart IP Extender





































































Отзывы: