INSTALLATION GUIDE
5
2. Connect the socket of any Uninterruptible Power Supply (UPS) to the Input
ports of the RPS, or connect the RPS to the power supply using the power cord.
3. Connect an Ethernet cable to Ethernet port of the RPS – see Figure 5.
4. Plug a Terminator into one of the iLINK ports.
5. Where you have an environmental sensor, connect the sensor’s connector to the
ENV port on the RPS Manager.
Connection diagram
The figure below illustrates the basic RPS connections.
Figure 5 RPS connection diagram
7. Installing the SNMP Utility
Assign an IP address for the RPS using the SNMP Utility.
1. Install the SNMP Utility located on the CD onto a Windows based computer.
2. Click Start/ Programs/ SNMP Utility. The SNMP Utility appears, see Figure 6.
