Minicom DX User IP Скачать руководство пользователя страница 31

Страница: 31 / 72

USER GUIDE

Horizontal Frequency (Hz)

- Horizontal (line) frequency.

Vertical Frequency (Hz)

- The vertical (refresh) frequency.

Total horizontal pixels

- The total amount of pixels per line, including non-visible

and blank areas.

Polarity

- The polarity (positive/negative) of the synchronization signals. V means

vertical, H means horizontal.

Description

Give the mode a name. The name appears in the Remote Console when

the custom mode is activated.

31.

User/Group Management

From the menu choose User/Group Management. The User/Group Management
settings appear. See Figure 25. Both users and groups are configurable, meaning that
each user or group can have different access capabilities.

Note! These users and groups are for the IP options only and are different from the
users and groups configured in the DX system.

The DX User IP is factory set with a supervisor user called

super

with the password

‘smart’. Change the

super

user password immediately.

Figure 25 The User/Group Management settings

Existing user

Select an existing user for modification or deletion. Once selected, click

to see the user information.

Содержание DX User IP









































































Результаты поиска

Содержание DX User IP

Отзывы:

Похожие инструкции для DX User IP

Бренды по названию

Популярные бренды

Minicom DX User IP, Руководство пользователя

Результаты поиска

Содержание DX User IP

Отзывы:

Похожие инструкции для DX User IP

Бренды по названию

Популярные бренды