|
24
|
Tub Clean
Select this course to wash and clean the washer's drum.
1) Turn on the washer by pressing the Power button (
①
).
2) Open the drum door.
Press the Door Release button (
②
) to open the drum door.
3) Add powdered bleach into the drum.
Use appropriate amounts of powdered bleach and drum detergent.
※
Do not add powdered bleach or drum detergent into the detergent drawer or the fabric-softener drawer.
※
Adding these products into either of the drawers can cause a malfunction and/or water leak.
4) Repeatedly press the Course button (
③
) until Normal is selected.
• Water temperature is set to cold, rinse cycles is set to 2, and spin strength is set to high automatically.
5) Press the Start/Pause button (
⑤
).
The door will lock, and the washer will start filling with water.
Note:
- The only selectable course will be Rinse+.
- Do not, under any circumstance, add laundry to the drum while using the Tub Clean
course.
- Run the Tub Clean course once a month.
To change the number of rinse cycles after selecting a course, press the Rinse+ button (
④
).
Each press of the button adds 1 rinse cycle.
※
The maximum number of rinse cycles allowed for Tub Clean course is 8.
Tip
“Keep the inside of the washer clean to make sure your clothes are
washed to their cleanest.
Tub Clean will wash the drum clean for better, cleaner results."
2
1
3
5
4
��_������_Washer_DWD-M253CW_����_���.indd 24
2021-04-13 �� 3:24:51
