Mini Pro Chassis Dyno V1, Инструкция по эксплуатации

Страница: 8 / 21

7
Install Flywheel Assy. Stiffner Adjust Wheelbase Install Belt Straps on Vehicle
5 6
Adjust Belt Tension Attach Bushing Pad to Flywheel Assy.
3 4
The dyno its already been pre-assembled. All you need to do is install the flywheel base plate and straps for the vehicle.
NOTE: If you are using your Motor Dyno Flywheel Assy then
you need to remove the belt shield and holder from the dyno.
Install the Flywheel Base Install the Flywheel Assy. and Belt
ASSEMBLE THE DYNO
1 2
NOTE:
Do not tighnen the screws.
More
Tension
Less
Tension
Unscrew to set
tension of belt
Uncrew to adjust wheelbase
Adjust Tension of the Belt Straps
7
Uncrew to adjust upper deck and tension of the straps