Mini Pro Chassis Dyno V1, Инструкция по эксплуатации

Страница: 12 / 21

11
NOTE: This sensor its already been pre-programed to be used with the dyno.
ELECTRONIC CONNECTIONS
ESC Connection
1
ESC/Servo Controller Diagram
Throttle Controller Sensor Connection
1. (-) Ground
2. (+) Positive
3. Signal
4. USB mini-b port
1
2
3
4
CONT.
(-) Ground
(+) Positive
Signal
1. Connect the ESC’s throttle OR the Servo’s
throttle cable to the sensor’s throttle port.
See above sensor driagram for more
OR
(-) Ground
(+) Positive
Signal
ESC Connection (Electrical Powered Vehicles)
Servo Connection (Gas Powered Vehicles).
Connect the Controller Board to PC
2
NOTE:
To install driver, please refer to page 14 of this manual.
Servo Connection
NOTE:
The throttle sensor can not power a servo. You must use an external battery (6V)
to use the servo.
(Y Servo Connertor (not included))