Mini Crosser M1 Cabin страница 55 Скачать руководство пользователя

Страница: 55 / 64

User guide P9-0151-B

55 of 64

Version 3.0.4 - 2017

Medema A/S

Adjusting the angle of the

armrests

The angle of the armrests can

be adjusted by turning this

screw.

Introduction to the EBLO seat

The lever for turning the seat.

Pull the lever up to release

the seat. The seat can then be

rotated 90° to each side, locking

at each 45°.

The lever is spring-loaded, and

the seat is locked automatically

Lever for fore/aft adjustment

of the seat.

Pull the lever up to release the

seat on the slide rail. Then the

seat can be moved forward or

backward as you wish. When

the lever is released, the seat

will automatically lock into place

when the lever is released.

This lever is located on the right side as standard, but can also

be positioned on the left side.

in the closest position.

There is a stop on the front and the back of the slide rail.

Содержание M1 Cabin

































































Результаты поиска

Содержание M1 Cabin

Отзывы:

Похожие инструкции для M1 Cabin

Бренды по названию

Популярные бренды

Mini Crosser M1 Cabin, Руководство пользователя

Результаты поиска

Содержание M1 Cabin

Отзывы:

Похожие инструкции для M1 Cabin

Бренды по названию

Популярные бренды