Mini Crosser M1 Cabin, Руководство пользователя

Страница: 31 / 64

User guide P9-0151-B 31 of 64 Version 3.0.4 - 2017
Medema A/S
New batteries do not reach full capacity until they have been
charged and discharged about 20 times.
It is IMPORTANT to fit the batteries correctly. The battery termi -
nals are /-. They must be fitted as shown in the sketch
below. Make sure that the terminals are properly closed. For the
same reason there must not be any burrs on the terminals.
The Mini Crosser should be charged while not in use. The char-
ger supplied from the factory switches over to trickle charging
(very low power consumption) automatically when the batteries
are fully charged. You can therefore leave the charger con-
nected until the Mini Crosser is next used. The charger cannot
overcharge the batteries.
The charger will flash until charging is complete. Then it will
show a steady light.
The charger must not be placed on the seat during charging.
IMPORTANT! Never use charging devices other than those
supplied from the factory without first contacting the dealer.
NEUTRIK NC3MX charging plug Connect the charging plug to the 3-pin
socket on the steering column. The
charging socket is located under the
protective cover.