29
To modify an existing configuration file, load the configuration file, and open the Modify
Buttons Menu. Make any desired changes to the Quick-Set Buttons, and click the
button. Your changes will then be saved to the current open configuration file.
To exit the Modify Buttons Menu, click the
button to return to the main control at
any time. If you have not saved your settings before closing the Modify Buttons menu, you
will be prompted to save your settings before closing.
C)
Manual Commands
Figure 40: Manual Commands control panel
The Manual Commands control panel allows you to enter and send individual commands
or strings of commands manually. From the Manual Commands control, you can send
commands to individual components or groups of components in the ZTVX.
Switch Commands:
This drop-down provides a full list of commands for individual
switches in the ZTVX. It also includes a full list of “Path=” commands specifying the full
signal path in a single command.
Switch States:
This drop-down provides a list of commands that return the current state
of any switch in the ZTVX.
Switch Counters:
This drop-down provides a list of commands that return the count of
switch cycles elapsed on each switch in the ZTVX.
Additional Commands:
This drop-down provides a list of additional queries and
commands for the ZTVX.
: This button adds the command selected from the dropdown menu to the
Command display.
Command:
This field displays the chosen command or string of commands to send to
the ZTVX.
NOTE: Commands in a string must be separated by a semicolon (;).
Send:
This button sends the command or command string in the “Command” field to the
ZTVX. Commands will not be executed until the “Send” button is clicked.
