27
Send Manual Command:
Clicking the Send Manual Command radio button activates
options to build a command for the selected button. You can assign commands to the
button in one of two ways:
All Commands: This drop menu contains a full list of commands for components
and signal paths in the ZTVX. Selecting a command will add that command to
the string in the Command Display field. Some users may find this feature easier
than manually typing out commands.
From / To Drop-Downs:
These menus allow you to define a signal path by
selecting options from the “From” and “To” drop-down menus. The
corresponding command string will appear in the Command Display Field.
:
Click this button to add a specified command to the Command Display field.
Command Display Field:
This field allows you to manually enter any string of commands
to control any component or signal path in the ZTVX. Commands in a string must be
separated by a semicolon. You may type commands yourself or add commands from
the All Commands and Paths drop menus below.
Figure 37: Command Display Field
Click
to save the command string to the selected button.
: This check box allows you to choose
whether the command string for the selected button should be automatically preceded by
the “ClearAll” command.
