Page 30 of 39
AN-49-005 (December 23, 2019) M176825 (R95497) File: AN-49-005(J).doc
This document and its contents are the property of Mini-Circuits
3.5.3
Dynamic addressing functions:
The center control panel will apply the attenuation settings to whichever combination of
attenuators is selected in the “Dynamic Address” panel
#
Name
Description
1
Select the
attenuator
channels to
control
Select one of three options:
Single channel – control one attenuator at a time.
Multi channels – select a number of attenuators by clicking on them and send
to them the same command (reset the selected channels by selecting ‘single
channel’ then ‘multi channels’ again.
All Channels – all connected attenuators will be selected.
2
Attenuation
tables
Table showing current attenuation setting of all connected attenuators
3
Refresh
Refreshes the addresses for the dynamic addressing daisy chain. Click on
this after connecting additional units, or changing the units connected .
Figure 3.5.3:
Main screen (with dynamic addressing)
1
2
3
