AN-48-003 Rev. H (Jun 09, 2022) This document and its contents are the property of Mini-Circuits ECO-013719 Page 38 of 44
3.11.3
Data recording for multiple sensors
Clicking on the ‘Recording’ button in the bottom right corner of the screen will cause the
data recording section of the window to expand below the initial power section selection
window (See
Fig 3.11.3
). Recording data settings in this window will apply to all power
sensors selected. For description of data recording settings see
section 3.7.
Figure 3.11.3:
Recording Multiple power sensors
Note:
File names for multiple power sensor data recording are always in the format of “[path]_[model
S/N].txt”. Thus, if the path entered is “C:\test”, the data for power sensor with serial number
11405080006 will be saved to file “C:\test_11405080006.txt”.
3.11.4
Add sensor
If you have already started working with a PWR power sensor and wish to start a second
sensor you can click on the 'Add sensor' button in the main screen. This will open a
second startup screen, as shown in
section 3.1.2
, showing the additional sensors
available. If only two sensors are connected via USB when clicking on USB it will
automatically open the second sensor, without displaying the power sensor selection
screen.
