Mini?Cam SoloPro 360, Руководство пользователя

Страница: 31 / 32

Rev A - 04/2012
Page: 31
Pressing the menu key when the joystick camera control is enabled will automatically disable it to
allow the operator control of the menu system. The operator must enable the joystick camera control
manually afterwards.
8.3 Camera Pressurisation
To pressurise the Pan & Rotate camera it must be connected to the SOLO Pro 360. If not already
done so, follow the guide in section 8.2 to get the camera working first.
Move the camera with the joystick to allow easy access to the valve on the side.
Unscrew the protection cap from the camera and screw in the recharge valve.
Press the special function key on the keyboard and select menu options Setup > Pressurise
This now gives a big screen version of the live pressure gauge. The camera can now be pressured to
approximately 500mBar with the pressurisation kit.
Do not over pressure! The CCU will warn for under/over pressure.
8.4 Driving the camera with pre-set movements
A range of pre-set camera movements are available to drive the camera e.g. drive a full 360 degrees
clockwise or anti-clockwise.
To view the full range of pre-set movements press the Special Function key and select Go from the
menu. Highlight the required movement and press down the joystick to activate it.