4
Brick Egg Stabiliser
01
Turn the crawler upside-down and
place on a sturdy raised object while
you carry out the installation of the
Stabiliser. Using T-Bar/Allen key* loosen
the axle bolts of the centre wheel on
each side of the crawler.
* 4mm for BEP150/140
6mm for BEP300
02
Remove the centre wheel from each
side of the crawler.
03
Prepare the Stabiliser by removing 4
screws and washers from one half of
the base plate.
04
Separate the two halves of the Stabiliser
ready for installation.
