Main Detector Parts
Detector Assembly
EN
EN
Main Detector Parts
GPZ 7000 is not waterproof
Detector Assembly
Attach mid shaft to upper shaft
1.
Release the cam lock on the upper shaft
by pulling the lever away from the shaft.
2.
The mid shaft can only be inserted into
the upper shaft in one orientation. Ensure
that the key stop on the mid shaft is
aligned to the upper shaft.
3.
Slide the mid shaft into the upper shaft
until the key stop appears at the top.
4.
Rotate the mid shaft 90° so that the key
stop is oriented as shown.
5.
Lock the cam lock by pushing the lever
towards the shaft
Attach coil and lower shaft to mid shaft
1.
Release the camlock on the lower shaft by
pulling the lever away from the shaft.
2.
Thread the coil cable up the centre of the
mid shaft.
3.
Insert the mid shaft into the lower shaft.
The lower shaft can only be inserted into
the mid shaft in one orientation. Ensure
that the key stop on the mid shaft is
aligned to the upper shaft.
* Coil is waterproof to 1m (3 ft)
Battery Pack
Battery Latches
Stand
Control Box
Trigger
Upper Cam Lock
Lower Cam Lock
Lower Shaft
Coil*
Headphone Module
Control Panel
Handle
Armrest
Armrest Strap
Armrest Lock
USB Connector
Mid Shaft
Upper Shaft
Refer to the Instruction Manual on CD for
the full list of parts included with your
detector.
Skidplate
Unauthorised modifications or
repairs to your detector will
VOID YOUR WARRANTY.
3
2
