EN
CAUTION
Use of this appliance by children aged less than 8 years is prohibited.
This appliance can be used by children aged from 8 years and above and by persons with reduced
physical or mental capabilities if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Cleaning and user maintenance shall not be made by children without supervision.
COMPLIANCE
THIS DEVICE COMPLIES WITH PART 15 OF THE
FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
Information to the User (FCC Part 15.105)
NOTE: Class B Devices
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment
and receiver
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV
technician for help
SOFTWARE
Certain components of the XChange2 PC software
application for use in conjunction with the Minelab
GPZ 7000 are subject to the GNU General Public
License, Version 2 (‘GPLv2’, www.gnu.org/copyleft/
gpl.html), or other open source licenses (‘Open
Source Software’). In compliance with the terms
of these Open Source Software licenses, the Open
Source Software that Minelab uses, modifies and
distributes is made available to the public, in source
code form, at www.minelab.com/open-source.
Complete details of the applicable licenses can be
downloaded from this website, and can also be
found on the installation CD for the software that is
included in the box with the GPZ 7000 detector.
DISCLAIMER
The Minelab metal detector discussed in this
instruction manual has been expressly designed
and manufactured as a quality metal detector and is
recommended for gold detecting in non-hazardous
environments. This metal detector has not been
designed for use as a mine detector or as a live
munitions detection tool.
PLEASE NOTE
Since there may be a variety of options available for
this detector, equipment may vary according to the
Model or items ordered with your detector. Certain
descriptions and illustrations may also differ (in this
manual) from the exact Model that you purchased.
In addition, Minelab reserves the right to respond to
ongoing technical progress by introducing changes
in design, equipment and technical features at any
time.
Minelab®, GPZ 7000®, ZVT™, Super-D™, Wi-Stream™, GPSi™, FindPoint®, GeoHunt™, GeoStore™, GeoTrail™,
XChange Your Detecting Connection™, PRO-SWING 45® are trademarks of Minelab Electronics Pty. Ltd.
Google Maps is a trademark of Google Inc.
1
