Page 26
The Minelab Excalibur Family
•
Always keep the spare battery pod above the water’s surface.
Your spare battery pod is not designed to be carried under water. If it is
submerged in salt water while disconnected, the battery will discharge and
the contacts will corrode.
Trouble-shooting Guide
Fault
Solution
No Sound
Check battery is charged
Ensure battery pod is connected
Ensure unit is turned “On”
Erratic Noises
Check battery charge and battery connections
Reduce the sensitivity by turning clockwise
Switch to the “Auto” position
Check for sand or grit between coil cover and coil
Check for overhead power lines and other sources
of electrical interference
No Target Response
Ensure unit is turned “On”
Check battery charge and battery connections
In the unfortunate circumstance that you need to return your detector to
Minelab for service, please fill out the Service Repair Form on page 28 and
enclose it with the detector. Please supply as much detail as possible as this
will assist our service engineers to rectify the fault quickly and efficiently.
