background image

1 Introduction

1.1

Read the manual

-

Please read this manual carefully and completely before using the product.

-

This manual is part of the product. Keep it in a safe and easily accessible location.

1.2 This is what operating instructions look like

1. - n. are placed before steps that must be done in sequence.

1.3

This is what lists look like

-

indicates an item in a list.

1.4 This is what menu items and softkeys look like

[ ] frame menu items and softkeys.

Example:

[Start]- [Applications]- [Excel]

1.5 This is what the safety instructions look like

Signal words indicate the severity of the danger involved when measures for preventing

hazards are not followed.

DANGER

Warning of personal injury

DANGER indicates death or severe, irreversible personal injury which will occur if the

corresponding safety measures are not observed.

Take the corresponding safety precautions.

WARNING

Warning of hazardous area and/or personal injury

WARNING indicates that death or severe, irreversible injury may occur if appropriate

safety measures are not observed.

Take the corresponding safety precautions.

CAUTION

Warning of personal injury.

CAUTION indicates that minor, reversible injury may occur if appropriate safety

measures are not observed.

Take the corresponding safety precautions.

is placed before a step.

describes the result of a step.

1 Introduction

Weighbridge Cable Junction Box PR 6021/68S

Minebea Intec

EN-3

Содержание Weighbridge PR 6021/68S



































































Отзывы: