Minebea Intec PR 6246/12, Руководство по установке

Страница: 17 / 74

5.2 Threaded bar suspension
The joint head mounting kits are intended for suspending weighing objects on load
cells PR 6246, see Chapter 11.2.1 .
Note:
For further information, see the installation manual relating to the joint head mounting
kit.
Another mounting options involves mounting the load cell with standardized
commercially available screws or threaded bars of strength class 5.8; their material
strength must not be lower than the core diameter of the thread.
For this purpose, the simplest version requires the following components:
- 1× threaded bar (3)
- 3× nut (4)
- 2× Spring (5)
To avoid transversal forces, it is recommended to use rounded washers (1) and conical
seats (2) (see Chapter 11.1 ).
E
max
= 100…500 kg E
max
= 1…3 t
Rounded washer (1) DIN 6319-C13 DIN 6319-C21
Conical seat (2) DIN 6319-G14.2 DIN 6319-G23.2
Threaded bar (3) M12 M20×1.5
5 Installation Tension S-type load cell PR 6246
Minebea Intec EN-15