Minebea Intec Maxxis 5 Phase PR 5900/81, Руководство по эксплуатации

Страница: 48 / 94

Set the number of lines displayed (1…5) in the visualization.
[Weighing point status]
If [active] was selected, a maximum of 5 lines can be displayed.
WP status material is displayed in line 1.
Possible selection for lines 2…5:
Production line, Recipe name, Recipe line, Set point, Actual value, Diference
(between target value and actual value), Gross, Blank line.
View weighing point @admin
Number of lines
Status weighing point
1st line
2nd line
3rd line
4th line
5th line
5
not active
WP status material
Blank line
Blank line
Blank line
Blank line
Default Save
If [not active] was selected under [Status WP], lines 2…5 are always empty.
5.4.11 Simulation
It is possible to test whether the settings/links of the digital inputs and outputs have been
parameterized correctly.
In a test structure, the process can be simulated in advance so that any necessary
changes can be made before installation.
The dosing signals for Coarse, Fine and Discharge are also operated in the simulation. The
speed of the coarse low to be simulated is adjustable in units/minutes (e.g.10 kg/min for
a scale with kg graduations).
The ine low is carried out at approx.
⅕
of the speed of the coarse low. The discharge is
carried out at 5 times the speed of the coarse low.
After a cold start, the simulation is of. The parameters are saved.
WARNING
Risk due to uncontrolled material low!
All signals are operated for real when the function is activated.
The simulation may only be carried out in a test structure!
3. Press the [Default] soft key to return to the factory settings, if required.
4. Finally, press the [Save] soft key to save the settings.
Phase PR 5900/81 5 Getting started
EN-46 Minebea Intec