5.3 Soldering work
Soldering work on the device is neither required nor permitted.
5.4 Cleaning
NOTICE
Property damage caused by unsuitable cleaning utensils/agents.
Damage to the device.
Prevent moisture from penetrating the interior.
Do not use aggressive cleaning agents (solvents or similar agents).
For use in the food industry, use a cleaning agent suitable for that particular working
environment.
Use soft sponges, brushes and cloths.
Spraying with water or blasting with compressed air is not permitted.
WP-A
Max
3000g
d=
0.01g
0.0
g
g
0g
3000g
?
?
No database found. Do you want to restore
the last saved database
from the SD card?
Yes
No
A selection window opens if no database ile is found in the directory.
7. Press the [Yes] soft key to restore the database from the faulty device on the
replacement device.
8. For further settings, refer to [System maintenance] - [Restore] - [SD card] in the
PR 5500 operating instructions.
1. Unplug device from mains supply, disconnect any data cables.
2. Clean the device with a cloth lightly moistened with a soap solution.
3. Wipe down the device with a soft, dry cloth after cleaning.
Process Controller Maxxis 4 PR 5500
5 Maintenance/repairs/soldering work/cleaning
EN-104
Minebea Intec
