Minebea Intec Compact Scale Puro Advanced EF-P1, Руководство по эксплуатации

Страница: 27 / 58

— AUT.STA Automatic output when data is stable
— INTERV Set the output interval (when INT.OUT is
selected)
— 1 CYC Each display cycle
— 2 CYC After 2 display cycle
— 5 CYC After 5 display cycle*
— 10 CYC After 10 display cycle
— 20 CYC After 20 display cycle
— 50 CYC After 50 display cycle
— 100 CYC After 100 display cycle
— RESET Factory setting
— NO not restored*
— YES enabled
— END Leave menu level
— BAUD Baud Rate
— 4800 4800
— 9600 9600*
— 19200 19200
— 38400 38400
— 57600 57600
— 115200 115200
— PARITY Parity
— 7 EVEN 7 data bits, even parity
— 7 Odd 7 data bits, odd parity
— 7 NONE 7 data bits, no parity
— 8 NONE 8 date bits, no parity*
— 7 MARK 7 data bits, no parity
— 7 SPACE 7 data bits, no parity
— STOP Stop Bit
— 1 1*
— 2 2
— HAND.SH Handshake
— NONE No Handshaking*
— XON-.XOF has no function
— RESET Factory setting
— NO not restored*
— YES enabled
— END Leave menu level
— CAL Initiates a span calibration procedure (zero and
span)
— LIN Initiates a linearity calibration procedure (zero,
mid-point and span)
6.2.8 Menu Selection [PC.COM]
Enter this menu to define PC Communication parameters.
Default settings are identified by an "*"
PC.COM
6.2.9 Menu Selection [CAL.ADJ]
Enter this menu to perform calibration and adjustment of your scale (see chapter 7 ).
CAL.ADJ
6 Menu Settings Compact Scale Puro® - Basic
Minebea Intec EN-25