Minebea Intec CAW2P, Руководство по эксплуатации

Страница: 22 / 224

Key Description
Gross/net key
: Switch display between gross and net value
3.3.3.2 Views in the display
There are two possible displays:
- View for measurement mode (weight values and calculated values) (see
Chapter 3.3.3.2.1 )
- View in the "menu mode" (device settings) (see Chapter 3.3.3.2.2 )
3.3.3.2.1 View in the measurement mode
1 2 3 4 5
6
7
8
9
10
11
12 13 14 15 16
17
18
19
20
Appl. 1 Appl. 2 Appl. 3
Legend
Pos. Description
1 Bar graph with 10% marks
- Displays the percentage at which the weighing range is uti-
lized to capacity by the applied gross weight (0% = lower load
limit, 100% = upper load limit)
or
- Display of the measured value in relation to a set point (for
the "checkweighing" and "classiication" applications)
Minimum for checkweighing
Maximum for checkweighing
Checkweighing set point
2 Symbol for active printing process
3 Display of the active range for multi-range weighing
4 Display of the active weighing platform, lashes when calibration
is required
5 1 2 Selected weighing platform 1 or 2
6 NET B/G Net/gross weight in the main display (with assigned tare memo-
ry/preset tares)
7 Note about a calculated value in the main display (not calibrated
value)
Combics 2 Series Complete Scales Models CAW2P, CAW2S 3 Device description
EN-20 Minebea Intec