Minebea Intec CAW2P, Руководство по эксплуатации

Страница: 156 / 224

3.17 - Individual/Component printout when
saved
— OFF 3.17.1 - Automatic printing of
— HEADCOM Automatic printing on
— EACH.TIM 3.17.2 - Print the entire standard print
coniguration every time when the
key is
pressed*
— ONCE 3.17.3 - Print the entire standard print
coniguration once with the
key
— VAL.FROM 3.22 - Value source for automatic saving
— APPL. 1 3.22.1 - Application 1*
— APPL. 2 3.22.2 - Application 2
— SAV.VAL. 3.23 - Save value
— NET 3.23.1 - Net*
— CALCUL. 3.23.2 - Calculated
— NET+CAL 3.23.3 - Net and Calculated
* Factory setting
7.13.5.1 Printout
You can conigure whether a printout is generated automatically when a weight value is
stored in the totalizing memory or manually by pressing the
key.
Setting: [APPLIC.] - [APPLIC.3] - [TOTALIZ] - [PRT.SAV.] (3.17) (see chapter 6.1.3.2 ).
- You can print manually by pressing the key (single printout): menu item
[PRT.SAV.] - [OFF] (3.17.1)
- Component log (single printout of an item): menu item [PRT.SAV.] - [EACH.TIM]
(3.17.2)
The total data record is printed when you clear the totalizing memory (by pressing the
key).
7.13.6 Example: Totalizing
Totalizing weight values.
Coniguration: The “Totalizing” application is selected, and printout has been set up (see
chapter 7.16 ).
Setting printing protocols: [SETUP] - [PRINT] - [PROTOC.] (7) (see chapter 6.3.7.1 )
- Single and result printout: Menu item [INDIV. 1] (7.6)
- Component log: menu item [COMPON.1] (7.7)
- Total data record: Menu item [TOTAL 1] (7.8)
1. Select menu [APPLIC.] - [APPLIC.3] - [TOTALIZ] with key and open with
key (see chapter 6.1.3.2 ).
2. To save the setting, press the key.
3. To exit setup: Press the key several times.
Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating
EN-154 Minebea Intec