Mine Site Technologies MP70 MinePhone, Руководство администратора, Страница: 29 / 72

Chapter
3
Manual Configuration of Network Settings
This chapter describes how to edit network settings on a MinePhone
when it is in administration mode. Topics:
• Access Point (AP) Configuration
The Network Settings menu provides settings and modes for wireless
connectivity and remote server locations. The MinePhone requires the
following settings configured to connect to the network:
• Session Initiation Protocol (SIP)
Configuration
• Real Transport Protocol (RTP)
Configuration
• Access Point (AP) — wireless connectivity to the network via
access points.
• Trivial File Transfer Protocol
(TFTP) settings
• SIP server — connection to the SIP server, which enables calls to
be made within the network and outside the network.
• Network Time Protocol (NTP)
Configuration
• Real-time Transport Protocol (RTP) — defines the packet format
for delivering audio over an IP network.
• Internet Protocol Settings
• Advanced Settings
• Trivial File Transfer Protocol (TFTP) server — contains
firmware, site and device specific configuration files which
download to the phone on start-up.
• Wi-Fi Survey
• Network Time Protocol (NTP) server — The handset
synchronises date and time from a NTP server.
• DHCP Enablement — configuring the phone's IP address to be
static or dynamic using a DHCP server.
• Network Mode — selection to use the phone in Ad-hoc or AP
mode.
• Wireless channel configuration — Radio channels that connect
the phone to the network.
It is highly recommended thatnetwork settings for a fleet of
MinePhones are centrally configured using the Mine Site Technologies'
ImPact Communication Appliance (ICA). Using ICA will simplify
configuration, save time and minimise errors. Please refer to the ICA
Administrator Console Setup Guide for details.
Text Input
Selecting a setting will open the current value in a text editable field.
The following commands can be used across all of these menus:
• Pressing OK will accept the current text and return to the last menu.
• Pressing Back will backspace and edit the text.
• The * key toggles between character and numerical input which
is indicated in the top right of the screen.
• Pressing a number key 2 to 9 repeatedly will cycle through the
characters printed on the key until the required character appears.
If the next character is located on the same key as the present one,
wait until the cursor appears and enter the letter / number.
• The # key will access the punctuation menu.
MP70 MinePhone Administrator Guide 29 Revision A