Mine Site Technologies MP70 MinePhone, Руководство администратора, Страница: 14 / 72

Charging Location
The charger should be placed in a well ventilated, non-hazardous area with access to a clean power source.
In an Intrinsically Safe environment, the MinePhone is not permitted to be charged in a hazardous area.
The handset must be returned to a non-hazardous area for charging. The ambient temperature for charging
should be within 0-40°C.
Power Adaptor
The power adaptor will operate at 110-240V AC power and comes with several plugs for different regions.
Check that you have been shipped with the appropriate power adaptor and plugs.
Caution: Use only charging docks and power adaptors approved by Mine Site Technologies. Use
of any other type may be dangerous, breach Intrinsic Safety requirements and will void the warranty.
Charging Dock
The charging dock has two LEDs on the front to indicate the charging status.
Status LED Indicator
Charging is in progress. Red LED on
Charging is completed. Green LED on
Internal battery is outside the 0-55°C temperature range for
charging. Red LED Flash: 300ms On, 300ms Off,
300ms On,1s Off.
Charging time-out error. Red LED Flash: 300ms On,300ms Off,
300ms On,300ms Off,300ms On,1s Off
Green and Red LED Off
• Phone is not in charger
• Charger is not connected to power
• Charging error.
Charging
Picture Procedure Step
Connect the power adaptor to a wall socket. 1
Connect the lead from the power adaptor to the charging dock. 2
Revision A 14 MP70 MinePhone Administrator Guide
Product Overview