Mine Site Technologies MP10-G2, Руководство по настройке, Страница: 13 / 17

11
3 P h o n e C o n f i g u r a t i o n
Tracker Mode
Tracker Server
3.4.3 Internet Protocol
Menu select: Enable, Disable
Server name or IP address
Default is Enabled
Allows for the setting of the phone's IP address via either DHCP, or manually.
field
DHCP
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Activate
3.4.4 Advanced Settings
Values
Menu select: Enable, Disable
IP address
IP address
IP address
IP address
Notes
If enabled other settings defined
here are ignored, default is
Enabled
IPv4 only
Select to enable current IP setting
changes without requiring a restart.
Please wait up to 60 seconds for
changes to take effect.
These variables define 802.11 and hardware specific settings. Phones must be restarted for changes to
these settings to take effect.
field
Speed
Link Mode
Network Type
DTIM Setting
Roaming Policy
Values
Menu select: 1, 2, 5.5, 11, 24, 36,
54 Mbps
Menu select: Auto, 802.11b,
802.11g
Menu select: AP Mode, Adhoc
Mode
Number in range 1-16
Menu select: By RSSI, When
disconnect
Notes
Faster speeds can improve call
quality but will result in greater
network usage and lower battery
life, default is 11 Mbps
Default is Auto
Manually change from Adhoc to AP
connection, default is AP Mode
How often the phone will check the
AP for buffered packets, default is
1
Defines how the phone handles
need to transition between APs,
default is By RSSI
Channel Select Number, dash, number (eg 1-11) Allows limiting channels scanned
if network works on restricted
channel range, default is 1-11