Mine Site Technologies MP10-G2, Руководство по настройке, Страница: 11 / 17

9
3 P h o n e C o n f i g u r a t i o n
3.4.1 AP Config
The AP Config settings define the wireless network the handset will attempt to connect to.
Field Values Notes
SSID String of up to 32 ASCII characters The phone will scan channels 1,6,
and 11 for the best connection on
this SSID
Set Security
WEP Key
WPA/WPA2 Key
Activate
3.4.2 Signal Protocol
Menu select: Open, WEP, WPA-
TKIP, WPA-AES, WPA2
Menu Select: 64 or 128 bit
encryption, string of up to 5 or 13
characters respectively
Up to 32 character string
Only one security model may be
defined and should be consistent
across all APs
Ignored if security set to Open or
WPA
Ignored if security set to Open or
WEP
Select to enable current AP setting
changes without requiring a restart.
Please wait up to 60 seconds for
changes to take effect.
The Signal Protocol settings define the locations of servers and protocols that the MinePhone handset
uses to communicate.
3.4.2.1 SIP
Session Initiation Protocol settings. These settings are currently loaded only at startup, the phone must
be restarted for changes to take effect. The SIP server and Port may be provided from a DHCP server.
field
SIP User Name
SIP Password
Auth User Name
SIP Server
SIP Port
Outbound Proxy Mode
Outbound Server
Outbound Port
Values
String of up to 50 characters
String of up to 50 characters
String of up to 50 characters
Server name or IP address
String of up to 5 digits
Menu select: Enable, Disable
Server name or IP address
String of up to 5 digits
Notes
Name of user as it appears to other
devices, traditionally same as Auth
User Name
Password used for authenticating
this user on the SIP server
Username for authenticating to the
SIP server
Location of SIP server
Port for accessing SIP server,
default is 5060
Default is Enabled
This must be set to same as SIP
server if not in use
This must be set to same as SIP
server if not in use