Basic Operations
Using the Touchscreen
Select screen items by pressing them directly on the patient mon-
itor’s screen. You can enable or disable touchscreen operation by
pressing and holding the [
Main Menu
] QuickKey for 3 seconds.
A padlock symbol
is displayed if touchscreen operation is
disabled.
Calibrating the Touchscreen
Select [
Main Menu
]
→
[
Maintenance >>
]
→
[
User Mainte-
nance >>
]
→
enter the required password
→
[
Cal. Touch-
screen
].
will, in turn, appear at different positions of the screen.
Select each
as it appears on the screen.
After the calibration is completed, the message [
Screen Cali-
bration Completed!
] is displayed. Select [
Ok
] to confirm the
completion of the calibration.
1.
2.
3.
4.
Changing General Settings
Setting up a Monitor
In situations where you install a patient monitor or change the
patient monitor’s application site, you need to setup the patient
monitor as follows:
Select [
Main Menu
]
→
[
Maintenance >>
]
→
[
User Mainte-
nance >>
]
→
enter the required password.
In the [
User Maintenance
] menu, select, in turn, [
Monitor
Name
], [
Department
] and [
Bed No.
], and then change their
settings.
Changing Language
Select [
Main Menu
]
→
[
Maintenance >>
]
→
[
User Mainte-
nance >>
]
→
enter the required password.
In the [
User Maintenance
] menu, select [
Language
] and
then select the desired language.
Restart the patient monitor.
Adjusting the Screen Brightness
Select the [
Main Menu
]
→
[
Screen Setup >>
]
→
[
Brightness
].
Select the appropriate setting for the screen brightness. 10 is
the brightest, and 1 is the least bright.
If the patient monitor operates on battery power, you can set a
less bright screen to prolong the operating time of the battery.
When the patient monitor enters standby mode, the screen will
change to the least brightness automatically.
1.
2.
1.
2.
3.
1.
2.
Содержание iPM 10
Страница 1: ...iPM Series Patient Monitor Quick Guide ...
