Fig. 9 frequency and channel settings
Pilots use FPV goggles to receive video streams from drone’s camera. The goggles needs to be correctly
setup before it can receive video. Please check and follow goggles vendor’s guide to set it up. By default
the goggles needs to be tuned to the same frequency of MR210’s transmitter (5945MHz) to work
properly.
Change Frequency Group and channel
Use the 2 buttons on the top of camera to adjust group and channel.
Long press on the front button for 2 seconds switches between PAL/NTSC. Short click flip video images.
Long press on the back button for 2 seconds change groups. Short click change channels.
Connect to Ground Station
As a professional flight controller, MindRacer has hundreds of parameters that user can tune. Using
QGroundControl software from computer is the best way to carefully adjust these parameters.
QGroundControl is a free software that anyone can download and use it on the fly. It can be downloaded
from http://www.qgroundcontrol.org. Currently it can support all major PC OS platforms including
Windows, MacOS, Linux, etc. Select the right version for your OS.
To connect, launch QGroundControl on your PC (Fig. 10).
Page 10
CH1/5
CH2/6
CH3/7
CH4/8
Group A
5740MHz
5760MHz
5780MHz
5800MHz
5820MHz
5840MHz
5860MHz
5880MHz
Group B
5705MHz
5685MHz
5665MHz
5645MHz
5885MHz
5905MHz
5925MHz
5945MHz
Group C
5865MHz
5845MHz
5825MHz
5805MHz
5785MHz
5765MHz
5745MHz
5725MHz
Group D
5658MHz
5695MHz
5732MHz
5769MHz
5806MHz
5843MHz
5880MHz
5917MHz
Group E
5733MHz
5752MHZ
5771MHz
5790MHz
5809MHz
5828MHz
5847MHz
5866MHz
Group F
5362MHz
5399MHz
5436MHz
5473MHz
5510MHz
5547MHz
5584MHz
5621MHz
