So, please look at “the big picture”. You may use your trusty pressure gauge as the “standard” or
you can use the TPMS as the standard. The important point is that they are all relatively
consistent.
Hexagonal Locking Nut Instructions
Note:
Only use the locking rings when your vehicle is going to be in a static, high risk area.
1.
Fasten hex nut clockwise onto valve stem. Nut must be positioned at least 1/4” (6.35mm)
from top of valve stem.
2.
Fasten transmitter onto valve stem until hand tight.
<="" li="">
