Note:
Using the Disable Sleep feature may cause significant battery usage. If you are
experiencing significant battery drain, turn this feature off.
How to Close the TireMinder® TPMS App
1.
Touch the ellipse ( ) on the top right of the screen.
2.
Touch the button labeled “Close App”.
3.
The App will now be closed.
Note
: Once closed, the app will still run in the background. To fully close the app, refer to your
device's close method. If you are unsure of how to close an app, please Google
"how to close app
YOUR_DEVICE_NAME"
.
Adding a Transmitter – How to Add a Transmitter to the
TireMinder® TPMS App
Use the following directions to add a transmitter to the TireMinder® TPMS App. Please make
sure there is a CR1632 battery in the transmitter before starting the process below.
1.
Open the TireMinder® TPMS App.
2.
Touch “Learn” on the bottom bar.
3.
Towards the center of the screen you will see two buttons labeled “Learning Mode” and
“Delete Mode”, make sure “Learning Mode” is highlighted. If “Learning Mode” is not
highlighted, press on “Learning Mode”.
4.
Touch the tire position you would like to add a transmitter to. Once touched, you will see
“Learning” on the display.
5.
Attach the transmitter to valve stem of the corresponding tire position (if you clicked the
driver’s front, add the transmitter to your driver’s front tire).
6.
Once the transmitter is on the tire, allow up to 20 seconds for the TireMinder® TPMS
App to find the sensor and display it on the screen. Once found, the tire position will turn
