Mindeo MD52 Series, Руководство пользователя

Страница: 30 / 72

24
Auto-detection scan
Auto-detect sensor: By setting Enable, the scanner will start operating if any nearby object has been
detected. The laser light of scanner stops scanning when there is a successful reading or no code is
decoded after the Stand-by duration elapsed. Once the laser light stops scanning, the present object
must be removed to enable Auto-detect sensor.
Operating mode:
In-stand-auto-detection- The scanner must be placed in the stand to enable Auto-detect sensor.
Auto-detection-always-ON- Auto-detect sensor is always enabled regardless of the placement of the
scanner.
In-stand-continue- The scanner must be placed in the stand to enable the scanning mode to be set as
continue.
SETUP
Option bar code Option Alpha. entry
Auto-detect sensor Disable
Enable 00
01*
Operation mode
In-stand-auto-detection
Auto-detection-always-ON
In-stand-continue 00*
01
02
Stand-by duration 00-99 (second)
00-99
04*
END
One step setting