Mincon Rockdrills – “The Driller’s Choice”
Page 10
5. Warranty
Mincon DTH HAMMERS
Warranty, October 2002
Mincon warrants that the Mincon DTH Hammers and spare parts therefore, manufactured by Mincon and delivered to the initial
user to be free of defects in materials or workmanship for a period of 3 months after initial operation or 6 months from the date
of shipment to the initial user, whichever occurs first. Mincon may elect to repair the defective part or issue full or partial credit
towards the purchase of a new part. The extent of credit issued will be determined on a pro-rata basis bearing in mind the
service life of the defective part against the normal service life of that part. The part will be replaced or repaired without charge
to the initial user at the place of business of an authorized Mincon distributor during normal working hours. The user must
present proof of purchase at the time of exercising the warranty.
The warranty applies only to failures resulting from defects in the material or workmanship and does not apply to failures
occurring as a result of abuse, misuse, corrosion, erosion, negligent repairs and normal wear and tear. Failure to follow
recommended operating and maintenance procedures which result in component failure will not be considered for warranty.
This warranty is in lieu of all other warranties, other than title, expressed or implied.
Limitation of Liability
Mincon will not accept any remedies to the user other than those set out under the provisions of warranty above. The total
liability of Mincon or its distributors with respect to the sale of DTH Hammers or spare parts therefor, whether based on
contract, negligence, warranty, indemnity or otherwise shall not exceed the purchase price of the product upon which such
liability is based. Mincon and its distributors shall in no event be liable to any party relating to this sale for any consequential,
indirect, special or punitive damages arising out of this sale or any breach thereof, or any defects in or failure of or malfunction
of the Mincon DTH Hammer or spare parts.
Warranty will be voided where:
•
There is evidence of damage resulting from insufficient or incorrect lubrication.
•
There is evidence of misuse through the application of heat, welding or of being struck.
•
There is evidence of distortion or bending however caused.
•
There is damage caused as a result of using incorrect servicing tools or procedures.
•
If it is evident that the hammer or its components have achieved a reasonable proportion of their anticipated life.
Содержание 6DH360
Страница 1: ...Mincon 6DH360...
