Function Description
69
M400-020A-K6
④
Buffer Offset [Default as
（
None
）
]
Use buffer offset function to specify the offset address for adding the data read from
the file to buffer zone. The standard setting is "None". User needs to set the
compensation value when in use. The following settings are available. To specify the
start address of loading file by set the [buffer offset for loading].
None
: The red file will be put into buffer memory without offset.
Positive offset
: Store the data to buffer address where the read file address is provided
with offset.
Buffer address = Formatting a Offset address
Negative offset
: Store the data to buffer address where the offset is subtracted from
the read file address.
Buffer address = Formatting address - Negative offset
Automatic negative offset
: Offset could be detected from the read file automatically
when this setting is enabled.
Buffer address = Formatting address - Negative offset
Additional for File Load
After loading file, the value of SUM and CRC32 will be updated on the main screen
and a message will be displayed for whether transfering the data to programmer
[Yes]/[No].
For SD buffer Memory, the data file can be saved as history and also can be cleared.
So there will be 2 kinds message:
※
Minato has no warranty for the data be saved in BufferMemory.
